Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

October 01 2015


Know the Types of Exhaust Clamps for Your Jeep

Are you among those people who know just the basics of their jeep? How to begin, brake, and accelerate? You can find much more about your jeep or another vehicle that you should know. Begin to see the two tail pipes at rear end of your car? Those are the visible part of the exhaust system. Yes, there's a whole bigger exhaust system down there. If you are wondering what holds up there, this is what this article is about. It will make you understand your exhaust clamps. - Hose Clips

The Exhaust Band clamps
These are used to connect two exhaust pipes. It is a clamp designed to stretch around the two pipes and create a seal. They are available in various sizes and designs. The one that has a block between he ends from the clamps is easy to install. You will need to tighten the clamps until it locks about the blocks. If you are looking at the size of your pocket before buying a clamp, you might need to consider the ones with a foil between the ends from the clamps. These are cheaper and in addition easy to install.

For large trucks, welding is preferable since it is stronger. It can cause holes inside the exhaust system on the other hand, especially if he welding isn't done right. Exhaust clamps would be the other alternative. They can hold on very well should they have been well tightened. However, with all the vibration on rough roads, they can become lose and noisy. If yours is an everyday jeep, then you can use the exhaust system.

You will discover clamps in aluminum and stainless steel. The best exhaust clamps are 100% stainless-steel and do not rust. They will not rust on your exhaust.

The U-Bolt Exhaust Clamp
This clamp is made to fold the pipe when tightened to produce the seal. It's not advisable to use the U-bolt clamps. This is because they break when removed and are not in a good condition for re-use. The have excess thread you can use to fasted to a bracket after tightening the clamp for extra support.

V-Band Exhaust Clamp
This clamp can be commonly known as Turbo Clamp. Inside these bands is a built -in angled grooves. The grooves blend with all the flange on the turbo housing and the flange on the exhaust pipe. There are various kinds of the V-band exhaust clamps available in different designs. All you want check is to ensure you have the right diameter that's the size of your exhaust tubes. In the event the diameter is right and the groove width, the bands will easily fit in just fine. - Hose Clips

Don't be the product, buy the product!